| Base Price List for 1-8 layers Prototype/Flex
Board |
| |
2 layers |
4 layers |
6layers |
8layers |
2layers
Flex Board |
| Total Area of
one Design (inch) |
155inch sq |
100inch sq |
155inch sq |
100inch sq |
75inch sq |
100inch
sq |
155inch
sq |
100inchsq |
155inch
sq |
75nchsq |
100inchsq |
| Total Area of
one Design (CM) |
1000 CM Sq |
650 CM sq |
1000CM sq |
650CM sq |
480 CM sq |
650CM2 |
1000CM2 |
650CM2 |
1000CM2 |
480CM2 |
650CM2 |
| Base Price (USD) |
$99 |
$89 |
$280 |
$250 |
$200 |
$550 |
$600 |
$700 |
$750 |
$260 |
$280 |
| 2/4/6/8 layers Specifications |
The size above means
total size of ONE Design combined (Price dose
not apply to combine several designs together). For
example if you have a 2layers 2"X2" with standard
spec,USD99 include shipping to North America we will
make 38pcs individual board for you, if you
need panelize we will do the step and repeat free of
charge.
1)High quality FR4 material Tg130, 0.062" with UL certificated, Two Side Green solder Mask, One Side White silkscreen, "HAL",1OZ copper. Free Shipping by FEDEX to North America.
(We also provide ROG4350B
and
Polyimid VT-901 TG250
extra USD120)
2) Minimum clearance and trace width 7mil, minimum hole size 15mil.
3)NO LIMIT ON THE NUMBER OF VIAS, MAXIMUM ONE INNER CUT PER BOARD.
4) NO LIMIT ON THE NUMBER OF SMD OR PTH COMPONENTS.
5)Lead time 5 days(1-2 Layers),
6days for 4 layers,
7-8days for 6layers and 8 layers (shipping by Fedex or UPS 3 business days from China to North America).(DAYS
ARE BUSINESS DAYS, MONDAY-FRIDAY)
6) Free Step and repeat service. Free V score
7) If you want
the boards be panelized. Maximum board size X or
Y size 14.5", maximum panel size 14.5"X10"
INDIVIDUAL
BOARDS WILL NOT HAVE THIS LIMIT.
8)Min
board size 1"X1", when the board X or Y size is less
than 1", the price will be 100pcs USD99 due to the
complex of V score. When the board shape is not
square 50pcs USD99, because tab-routing is needed
for the panel.
9) No Electrical Testing for 1-2 layers, maximum 15% fail rate, Free Testing for 4-8 layers, maximum fail rate 2%.
10)No Blind or buried holes, or
impedance confrol for multi-layers PCB. |
|
1 or 2layers FLex Board Specifications
|
1)High quality
Polyimide material , 0.0039"(0.1mm) with UL certificated, Two Side Green solder Mask, One Side White silkscreen, "HAL",1OZ copper. Free Shipping by FEDEX to North America.
2) Minimum clearance and trace width 7mil, minimum hole size 15mil.
3)NO LIMIT ON THE NUMBER OF VIAS, MAXIMUM ONE INNER CUT PER BOARD.
4) NO LIMIT ON THE NUMBER OF SMD OR PTH COMPONENTS.
5)Lead time 6 days(1-2 Layers), (shipping by Fedex or UPS 3 business days from China to North America). (DAYS
ARE BUSINESS DAYS, MONDAY-FRIDAY)
6) Free Step and repeat service
7) If you want
the boards be panelized. Maximum board size X or
Y size 10", maximum panel size 10"X10"
INDIVIDUAL
BOARDS WILL NOT HAVE THIS LIMIT.
8)Min
board size 1"X1", when the board X or Y size is less
than 1", the price will be 50pcs USD280 due to the
complex of V score. When the board shape is not
square 30pcs USD280, because complex routing is
needed for the board.
9) No Electrical Testing for 1-2 layers, maximum 15% fail rate |
| Payment |
Paypal, VISA, Master, AMEX |
| Extra Fees On Top of Base Price (USD) |
| 2oz/3oz/4oz/5oz/6oz copper (1-2layers) |
$20(2oz)/$40(3oz)/$60(4oz)/$100(5oz)/$120(6oz) |
|
4layers |
$40(2oz)/$100(3oz)/150(4oz)/>4oz need quote |
|
6layers |
$60(2oz)/$150(3oz)/$200(4oz) |
|
8layers |
$60(2oz)/$150(3oz)/$200(4oz) |
|
Min trace width/ clearance(2layers) |
$20(6mil)/$40(5mil)/$50(4mil) |
|
Min trace width/ clearance(4layers) |
$40(6mil)/$50(5mil)/$80(4mil) |
|
Min trace width/ clearance(6-8layers) |
$40(6mil)/$60(5mil)/$80(4mil) |
| Minimum
hole size<15mil(min 8mil) |
$30(12MILI)/40(8MIL) |
| Two Side Silk Screen |
$20 |
|
Complex Board Shape |
if the routing points are more than 6
points, $20 |
| PCB
THICKNESS 2layers |
$20(0.024",0.031")/$30(0.078"),$50(0.093"),$80(0.118") |
|
4layers PCB THICKNESS |
$200(0.024”)$150(0.031")/$100(0.078"),$150(0.093"),$200(0.118") |
|
6-8layers
PCB THICKNESS |
$150(0.031")/$100(0.078"),$150(0.093"),$200(0.118") |
| Gold Fingers/Gold Plating |
$80(GOLD
THICKNESS 3-5MICRO INCH) |
| Solder mask |
$20(Blue, Red, Black,
Yellow, White) |
| Silk screen |
$20(Blue,
Red, Black) |
| Electrical Testing for 1-2 layers |
$20 |
| FR4 Tg170 for 1-2 layers |
$20 |
|
Rogers
4350B(0.5oz/1oz) for 1-2 layers(0.8mm thickness) |
$120 |
|
Polyimid VT-901
TG250 |
$120 |
| Multi-Design Panel/2layers/4layers |
$30(2layers)/$80 per extra design (4layers),
PLEASE READ THE RULES BELOW FOR MULTI-PROJECT PANEL |
|
Multi-Design Panel/6layers/8layers |
$80 per extra design (6layers)/ $100 per extra
design(8layers) |
| Tab-Routing |
$20 |
| Shipping cost outside North America |
Extra $10 to any other countries outside North America/ Extra $20 to Africa, Middle East |
| Lead time for 1-2 layers |
$100(24hours)/$60(48 hours)/$45(72hours)($40
extra for multi-project) |
| Lead time for 4 layers |
$200(48
hours)/$150(72hours)/$100(4days)/(Do
not allow multi-project) |
|
Lead time for 6 layers |
$250(72hours)/$200(4days)/$100(5days)/(Do
not allow multi-project) |
|
Lead time for 8 layers |
$250(4days)/$150(5days)/(Do
not allow multi-project) |
| ROHS Compliance |
$20 immersion silver/$80 gold
finishing |
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Specifications for the 1-4 layers special price
1) Number of boards you can get
The number of boards you can get=Total area DIVIDE Area of your design. For example if the size of your board is 10inch sq, and total area you buy is155nch sq, the number of boards you can get =155/10=15pcs,
when the board X-Y size is less than 1", due to the
complex of V score you get 100pcs for $99, if the
panel need tab-routing you get 50pcs for $99+$20
TAB-ROUTING fee. 2) Multi-Project Panel. When the designs on the panel are different extra fees will be charged for multi-project panel. Regulations for multi-project panel are below:
 Panelization of the multi-project panel must be done at customer side. We do not offer service to panelize multi-project panel.
We need 40mil clearance between the boards. We can also separate the multi-project panel if the number of different projects on the panel is less than six, otherwise de-panelization must be done at customer side.
If all designs on the panel are square and the same size, V score can be applied to the panel and number of
project is 20.
For multi-layers PCB
we charge a extra fee for each design you added to the
multi-project panel, for example 4 layers we charge
$80/design, 6layers extra$100/design, 8layers extra
$150/design. To order multi-project panel, customer must allow 15% fail rate for the small unite on the panel.
3) Lead time
The lead time is counted Monday-
Friday, except holidays in China
Holidays in China: Labor's days( May 1st-May 3th), National day (Oct1 -Oct 3th), New Year (Jan 1st), Chinese New Year.
Shipping time is 3-4 business days to North America, 4-5 business days around world if the order is shipped by FEDEX.
4) ROHS Compliance
The FR4 material we use comply with ROHS, if you want ROHS PCB you just need to select "lead-free" finishing.
The
lead-free finishing we provide are: Immersion gold
(extra $80), Immersion silver (extra $20)
------------------------------------------------------------------------------------------------------------------------------------------------------------
To place the order:
Please send Gerber274X and NC drill files to goldphoenixtech@yahoo.ca or sales@goldphoenixpcb.biz by email to place order.( NOLY GERBER files are accepted)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Payment
VERY IMPORTANT:
PLEASE SEND AN NOTICE EMAIL TO sales@goldphoenixpcb.biz
AFTER YOU SEND THE PAYMENT THEN WE CAN PROCESS YOUR JOB
ON TIME.AND YOU WILL SEE AN CONFIRMATION EMAIL AFTER THE
JOB IS PROCESSED
1) Our Paypal Account:
(PLEASE NOTICE THAT WE WILL SHIP
THE ORDER AFTER THE ECHECK IS CLEARED if the payment is
send by echeck, echeck usually take 5-7days to clear)
"Echeck" Paymment please send
to cash@goldphoenixpcb.biz. Echeck is Money sourced from
your bank account and the payment MUST BE send as echeck.
To send echeck
(1) loginto you paypal account select send payment
(2) On the send payment page click the "change" on the
"Payment Method", and select ECHECk, then click continue
Credit Card Payment (Money send from credit card,
or paypal balance) please sends to: credit@goldphoenixpcb.biz +3.4% credit card charges
How can I know my payment is cash payment or CC payment, if I send the payment form paypal?
Paypal account can be applied at www.paypal.com, paypal is a ebay company.
2) If the payment is from credit card, there is 3.4% surcharge. And only Canadian dollars can be billed to the credit card, customer maybe will see 3% price different from the US dollars depend on which credit card you use.
|
