To place the order or ask for Quote:
Select the spec you want for your PCB, this page will estimated the price for you.
Please email Gerber 274X+NC drill files to sales@goldphoenixpcb.com or info@goldphoenixpcb.com For RFQ and place order
SMT/PTH Assembly Pin QTY | Solder Stencil | Cost | Lead Time |
1Kpins | USD200 | USD150 | 10-12days |
5Kpins | USD200 | USD200 | 10-12days |
10Kpins | USD200 | USD300 | 10-12days |
Notes:
Shipping Instruction
1) You need prepare an invoice for your shipment. In the invoice please include:
(1) Quantity of each item you shipped in the package, MUST MATCH THE ITEMS IN THE PACKAGE. If you can not count the QTY accurately, please try to make the QTY as accurate as possible.
(2) Value of each item, YOU CAN UNDER VALUE the package, YOU CAN UNDER.BUT THE VALUE SHOULD BE REASONABLE
And example is below:
YOU COMPAY ADDRESS AND TITLE | |||
Ship to: Gold Phoenix Technology Assembly Department Guandongyuan Road 2-2,The Optics Valley Intl Chamber of Commerce Building #A ROOM 2101-2102,HONG SHAN DISTRICT, HuBei ,Wuhan,430074 Tel: 86-027-87780336 |
|||
Item | QTY | Unit Price | Sub total |
Capacitor, 1uF/100 | 100 | $0.01 | $1 |
Resistor,5K+/-5%, 080 | 100 | $0.01 | $1 |
LM7805 | 100 | $1 | $100 |
TOTAL | $102 |
To speed up the customer clearance please tries to make the custom invoice as simple as possible. For example all resistors can be simply listed as “SMT Resistor,+/-5%, 0805” 100Kpcs, 0.001/pcs, total USD100”, Capacitors can be do it in the same way. If there are too many items listed is will take the broker a lot more time to prepare the custom invoice and it also take more time for the custom to check your shipment. We suggest all items listed do not exceed “ONE” page.
2) It is very important that you TRY TO USE"DHL" to ship the components, it will be much easier for us to clear the custom if you using"DHL". You can also use FEDEX or USPS the shipping cost maybe will be reduced, but it will take us a lot more time to clear customer for you Please send us the tracking number after the components are shipped. PLEASE DO NOT USE. UPS. DHL TAKE AROUND 5 BUSINESS DAYS TO CLEAR CUSTOM, USPS OR FEDEX CAN TAKE UP TO 7-10 BUSINESS DAYS.
3) Tax: Please notice that there is tax on top of the value you claim for your shipment. If you want save money, you can claim a reasonable lower value of the shipment. For example we suggest US40 for 0.5-1Kg shipment, US100 for 1Kg-2Kg package, US250 for2Kg-5Kg package, US400 for 5Kg-10Kg package and label it as sample. Please notice than the claim value is the value you insured for the package.
4) Tax for your shipment is as below:
1) Claim value
Capabilities
Payment Methods
Specials Price
Carriers
Support Hobbyist
Certificate
Customer Support
Follow Us
Tel: 1-905-339-2881
Email: sales@goldphoenixpcb.com , tech@goldphoenixpcb.com
Copyright Gold Phoenix PCB Co., Ltd. 2011 - 2023
Tel: 1-905-339-2881 Email: sales@goldphoenixpcb.com , tech@goldphoenixpcb.com
Quality Control System
|
Products/Service
|
Friendly Links
Copyright Gold Phoenix PCB Co., Ltd. 2011 - 2023
Paypal payment instruction Updated in 2011.
VERY IMPORTANT:
1) PLEASE SEND AN NOTICE EMAIL TO sales@goldphoenixpcb.com AFTER YOU SEND THE PAYMENT.
2) PLEASE PUT THE “GERBER FILE’S NAME” ON THE PAYPAL PAYMENT FILE.
PLEASE SEND THE PAYPAL PAYMENT USE MASS PAYMENT. For mass payment the cost to the sender only USD1 to send each payment. And for us it is free to receive the payment. The payment instruction is below. You must have a PayPal Premier account or Business account, and it must be a verified account, before you can use Mass Payments.
Our Two Paypal Accounts are listed below:
If you do not want pay the paypal fee please read the instruction below, and send the payment as mass payment.
1) "Paypal Mass payment" please send to mass@goldphoenixpcb.com. We created a mass payment file for you (CAD.csv/USD.csv). PLEASE CHANGE THE “PAYMENT AMOUNT” AND NOTES IN THE PAYMENT FILE.
2) Regular payment please sends to: credit@goldphoenixpcb.com AND ADD EXTRA 3.4% paypal charge. FOR EXAMPLE IF THE QUOTE PRICE IS USD100, PLEASE SEND USD103.4 TO credit@goldphoenixpcb.com
MASS PAYMENT INSTRUCTION
1) CHANGE THE “PAYMENT AMOUNT” AND NOTES IN THE PAYMENT FILE. Then upload the “CSV” file we send you.
2) Please put the” gerber file name” on the “Email subject”
3) Please put your orders notes, and shipping address on the “message to the recipient”
4) After that Clike Review the payment, after make sure the payment info is right, then you can submit the payment
How to create a payment file
1. Choose how you will generate the payment file. You can use a notepad, database, or a spreadsheet application like Microsoft Excel.
2. Arrange your recipient information. Let’s say you’ll be using Microsoft Excel to arrange your data. Each row in your file should contain all the data for one recipient, divided into 5 columns. From left to right, you’d enter email address, payment amount, and currency type. The first 3 columns are required; the 4th and 5th columns are optional and can be used for your internal tracking or for adding a note to the recipient.
Here’s an example of how the data could be arranged in Excel.
The email address, for your recipient.
The amount you’ll be sending to that recipient.
The 3-letter currency abbreviation. See table below.
An optional field for unique customer IDs, identifiers, etc.
An optional field for a custom note to your recipient.
Currency chart
Please note that payments in different currencies must have separate Mass Payment files.
Currency Abbreviation
U.S. Dollar USD
Canadian Dollar CAD
What does CNC Rout points mean?
Each corner or "turn" on your pcb is a rout point - that is every time the router bit turns or stops. Each radius is three points. Count 8 for a circle and for each tab-routed pcb in an array configuration. More than 6 routing points will be consider as complex shape board by GP.